Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

After you have installed Site Controller and verified your physical setup, you will want to assign an appropriate site template to the controller and also put into production.

Location that are in state Production:

  • Reporting (e.g. Audit Log, Fuel Reports)
  • Dashboard → Map VIew
  • Dashboard → Location Detail

Site Templates include a full sensor, action and automation configuration for a remote Site Controller. A template must be created before hand, which involves some detail work, check out Working with Templates for details or for a quick intro read the /wiki/spaces/SSCL/pages/47775864 guide that covers creating a site template as well.

Step-by-step guide

  1. Go to OrganizationLocations and select the location you want to assign the template to
  2. In the General tab, set Prod/Dev to PRODUCTION

  3. Set Longitude and Latitude in GPS Location

    You will see your new location based on the GPS coordinates in Dashboard → Map View then. Try the online long/lat calculator to get coordinates to a specific address.

  4. Select the Gateways tab and choose the right template from the Assign template drop down
  5. Click Save to apply all changes

 

Next steps

You assigned a template already but to finally apply this new configuration you have to deploy it. Deployments can be scheduled and allow you to plan your maintenance wokrs and changes.

  • No labels