Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

To connect an external mqtt client (like MQTT.fx) to the mosquitto broker inside an Cisco LXCContainer/IOXClient.

 

First enable the elevated mode in the Cisco router by typing "enable".

Then we use the command "show ip int br" to see the configuration of the interfaces.

The external HOST ip (192.168.118.17) and the internal ip (192.168.1.1) which is used for the Guest Operating System (GOS) and the LXC Container.

C829_OpenBerlin#show ip int br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0 unassigned YES NVRAM down down
wlan-ap0 unassigned YES NVRAM up up
GigabitEthernet1 unassigned YES unset up up
GigabitEthernet2 unassigned YES unset down down
GigabitEthernet3 unassigned YES unset down down
GigabitEthernet4 unassigned YES unset down down
Wlan-GigabitEthernet0 unassigned YES unset up up
Async0 unassigned YES unset up up
Async1 unassigned YES unset down down
GigabitEthernet5 192.168.1.1 YES NVRAM up up
Cellular0 unassigned YES NVRAM up up
CellNM7 unassigned YES unset down down
NVI0 192.168.1.1 YES unset up up
Vlan1 192.168.118.17 YES NVRAM up up

 

To see the different ip addresses used for the GOS and the LXC Container, we use the command "sho ip arp | inc 192.168.1.1".

Typically the first entry is the Cisco gateway itself, the second the GOS and the third the LXC Container.

 

C829_OpenBerlin#sho ip arp | inc 192.168.1
Internet 192.168.1.1 - ecbd.1dba.4b4c ARPA GigabitEthernet5
Internet 192.168.1.3 2 0200.0190.8b05 ARPA GigabitEthernet5
Internet 192.168.1.4 0 5254.dd79.d565 ARPA GigabitEthernet5
Internet 192.168.112.1 0 0017.c56b.988b ARPA Vlan1
Internet 192.168.115.5 0 6238.3031.3238 ARPA Vlan1
Internet 192.168.117.50 0 f01f.af47.8738 ARPA Vlan1
Internet 192.168.117.54 155 101f.74fc.40f0 ARPA Vlan1
Internet 192.168.117.254 10 3235.6237.3937 ARPA Vlan1
Internet 192.168.118.17 - ecbd.1dba.4b40 ARPA Vlan1
Internet 192.168.118.18 - ecbd.1dba.4b40 ARPA Vlan1
Internet 192.168.119.96 62 0800.273c.f693 ARPA Vlan1
Internet 192.168.120.221 0 0003.2d10.517c ARPA Vlan1
C829_OpenBerlin#

 

Finally to access the internal network from the outside, we NAT the ip address of the LXC container to the internal network, via VLAN1 with the correct MQTT port (1883).

 

ip nat inside source static tcp 192.168.1.4 1883 interface Vlan1 1883


Now we can connect to the MQTT broker with an external tool (MQTT.fx).

 

 

  • No labels