Since IR829 and IR809 need a different configuration. Here is the one for the IR809. Change as needed!
Warning |
---|
Pay special attention to the boot system flash. It is extremely important that you configure the right firmware! |
Code Block |
---|
Current configuration : 2763 bytes ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname IR809 ! boot-start-marker boot system flash:/ir800-universalk9-mz.SSA.156-0.00.25.GB boot-end-marker ! ! enable secret 5 $1$zvRq$uiktb.juUqpCIA5237Hq0. enable password password ! no aaa new-model ethernet lmi ce ! ! ! ! ! ! ! ! ! ! ! ! ip dhcp excluded-address 192.168.1.1 192.168.1.5 ip dhcp excluded-address 10.10.10.1 10.10.10.100 ! ip dhcp pool gospool network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.4.4 option 42 ip 192.53.103.108 remember ! ! ! ip domain name azeti.com ip name-server 8.8.4.4 ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! chat-script lte "" "AT!CALL" TIMEOUT 20 "OK" ! ! license udi pid IR809G-LTE-GA-K9 sn JMX2007X03V ! ! username admin password 0 admin username cisco privilege 15 password 0 cisco ! redundancy ! ! ! ! ! controller Cellular 0 lte sim max-retry 0 lte failovertimer 0 lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monitor-timer 20 lte modem link-recovery wait-timer 10 lte modem link-recovery debounce-count 6 ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0 ip address dhcp ip nat outside ip virtual-reassembly in no ip route-cache duplex auto speed auto ipv6 enable ! interface GigabitEthernet1 ip address 10.10.10.10 255.255.255.0 ip nat outside ip virtual-reassembly in no ip route-cache duplex auto speed auto ipv6 enable ! interface GigabitEthernet2 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ipv6 enable ! interface Cellular0 no ip address encapsulation slip dialer in-band dialer string lte ! interface Cellular1 no ip address encapsulation slip ! interface Async0 no ip address encapsulation relay-line half-duplex media-type rs485 ! interface Async1 no ip address encapsulation scada ! ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source route-map GOS_WAN interface GigabitEthernet0 overload ip nat inside source route-map GOS_X20 interface GigabitEthernet1 overload ip nat inside source static 192.168.1.7 10.10.10.13 route-map GOS_LAN ip nat inside source static 192.168.1.6 10.10.10.14 route-map GOS_LAN ! ip access-list extended LAN permit ip 192.168.1.0 0.0.0.255 10.10.10.0 0.0.0.255 ip access-list extended WAN deny ip 192.168.1.0 0.0.0.255 10.10.10.0 0.0.0.255 deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255 permit ip any any ! ! route-map GOS_LAN permit 10 match ip address LAN set ip next-hop 10.10.10.1 ! route-map GOS_WAN permit 10 match ip address WAN match interface GigabitEthernet0 ! route-map GOS_X20 permit 10 match ip address LAN match interface GigabitEthernet1 ! ! control-plane ! ! ! ! line con 0 stopbits 1 line 1 exec-timeout 0 0 transport preferred none transport input all transport output none stopbits 1 line 2 stopbits 1 line 3 script dialer lte no exec transport preferred none transport output none line 8 no exec transport preferred none transport output none line 1/3 1/4 transport preferred none transport output none stopbits 1 line 1/5 1/6 autobaud transport preferred none transport output none stopbits 1 line vty 0 4 password admin login local transport input ssh ! no scheduler max-task-time relay line 1 1/5 ntp update-calendar ntp server ptbtime1.ptb.de ! ! ! end |