Page Comparison

General setting, which should be used for all appliances, can be set on SONARMANAGER by proceeding as follows:

1. Click on Setup > Settings => The "Settings screen opens with a view on “Common Properties” (see picture belows)
   Image Added

2. Fill the parameters values according to the explanations in the table below

   	Parameter	Description

...

1. Common Properties

1. Status File Download Interval in Minutes

...

1. 	Defines at which interval (in minutes) a SONARPLEX appliance is updated automatically. Notice: The shorter the interval, the higher is the usage of the SONARPLEX appliance. We recommend not to set a value below the preset value of 5 minutes.
   Default Admin Password

...

1. The administrator password of the SONARPLEX appliance. With this password, SONARMANAGER logs into a SONARPLEX appliance. Otherwise the SONARPLEX appliance cannot be configured.

   Default Communication Port

...

1. Defines the default port to access SONARPLEX appliance and azeti AGENT.
   Use Aliases in Status Tree
   Preload Performance Charts
   Split Problem Views
   Use sounds for Problem Notification

...

1. If enabled, an audio file is played in the event of a fault.

   Use Status Line for Problem Notification

...

1. If enabled, an error message is displayed in the status line of SONARMANAGER in the event of a fault.

   Sound for Critical Status

...

1. Choose an audio file for the acoustic indication of the CRITICAL status.

   Sound for Warning Status

...

1. Choose an audio file for the acoustic indication of the WARNING status.

   Sound for Down Status

...

1. Choose an audio file for the acoustic indication, when a host is down.

   Language

...

1. Choose the language of the SONARMANAGER application
   Reopen SONARVIEW Windows
   Check for SONARMANAGER Updates	If enabled, an automatic search for a program update for SONARMANAGER is performed at regular intervals. If there is a program update available, a corresponding information text indicates the possibility to install that program update.
   Mib Scanner	Default SNMP Version	Defines the default SNMP protocol version to be used.
   	Default Community String	Enter the default SNMP community string. E.g: public, …
   	Result Cache Time in Minutes	Defines for how long the data of the last MIB scan are kept in the cache. If another MIB scan is performed within the time specified here, data from the cache are used. No further MIB scan is performed on the SONARPLEX appliance. That means no data are transferred.
   	Default service Templates	Select the default service template.

2. Then click on “OK” to save changes