The following describes the settings for Configuration > Network > Agent SNMP Configuration in detail.
Setting
Description
Trap Agent Portto use
TCP Port to which the agent should be bound
Protocol
Recommended to use protocol 2.0 as it offers encryption
Agent Password
Password, this password is required for communication with SONARMANAGER and for the communication in Distributed Monitoring setups
Debug Level
Enable debug messages
listen for traps
Trap Agent Debug Level
Check for updates
Enable auto updates of the agent
Note
The auto update feature for the agent is currently not enabled anymore due to technical issues. The agent is updated anyway with every system update.
Level of debug detail starting from nothing (OFF) up to heavy debug (TRACE) . The log can be found in
Insert excerpt
_AdminWeb
_AdminWeb
nopanel
true
> Logs > Azeti Agent [azeti_ix.log]
Max number of child processes
Limit for the number of agent child processes that could be forked
SNMP Processor
Trap OID Output Format
Format of the corresponding trap OID, can be fully numeric up to symbolic.
Note
The Trap Filters are fully dependent on this setting, e.g. if you configured trap filters to match on numeric OIDs, you must set numeric OIDs as format here too. Otherwise the trap filters won't apply anymore.
Number of trap history entries
Number of last traps that should be saved in the trap history database, see
Insert excerpt
_AdminWeb
_AdminWeb
nopanel
true
> Trap > Filters
Trap community authorization string
Community string for authentication of incoming SNMP traps
Agent community string
Community for SNMP Agent (SNMP GET)
Agent sysName Value
System name, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysName.0
Agent syslocation Value
System location, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysLocation.0
Agent syscontact Value
System contact, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysContact.0