The following describes the settings for Configuration > Network > SNMP Configuration in detail.
Setting
Description
Trap Agent Port
TCP Port to listen for traps
Trap Agent Debug Level
Level of debug detail starting from nothing (OFF) up to heavy debug (TRACE) . The log can be found in > Logs > SNMP Processor
Trap OID Output Format
Format of the corresponding trap OID, can be fully numeric up to symbolic.
The Trap Filters are fully dependent on this setting, e.g. if you configured trap filters to match on numeric OIDs, you must set numeric OIDs as format here too. Otherwise the trap filters won't apply anymore.
Number of trap history entries
Number of last traps that should be saved in the trap history database, see > Trap > Filters
Trap community authorization string
Community string for authentication of incoming SNMP traps
Agent community string
Community for SNMP Agent (SNMP GET)
Agent sysName Value
System name, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysName.0
Agent syslocation Value
System location, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysLocation.0
Agent syscontact Value
System contact, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysContact.0