List of approved Sensors

Here is a list of recommended sensor to use with the Azeti solution. This list is only a recommendation, as any sensor that is compatible with the protocols supported can be used.

Supported Protocols and Types

A wide variety of sensor and I/O protocols are supported and any standard device that complies with these standards is consider compatible. I/O Modules, such as the Advantech and B&R X20 extend the solution with hundreds of different input and output variations as these device translate from, e.g. 4-20mA or sink input into MODBUS TCP. See the vendor list and their catalogues for reference.

  • MODBUS TCP
  • MODBUS RTU/ASCII
  • Digital Inputs
    • Sink/source inputs (dry/wet contacts)
    • Relay outputs
  • Analogue Inputs
    • 4-20 mA
    • 0-5/10 Volt
  • UDP Data
  • TCP Sockets

Input/Output Modules

Modbus RTU

VendorDeviceCommentConnects viaPower
AdvantechADAM-4051-BE16 Digital InputsRS485 MODBUSDC 24V
AdvantechADAM-4117-AE  8 Analogue InputsRS485 MODBUSDC 24V
AdvantechADAM-4150-AE7 Digital Inputs, 8 OutputsRS485 MODBUSDC 24V

Advantech has many more modules with different configurations of inputs and outputs. All of them should be compatible. For more information go here

Modbus TCP

For modular installations. 

VendorDeviceCommentConnects viaPowerLink
B&R AutomationX20 SeriesModular I/O system offering modules for many combinations of inputs/outputs, AC meters and condition monitoring.EthernetDC 24VX20 System

Recommended B&R X20 configuration

The following combination fulfills most common requirements.


ModuleDescription

X20BC0087

MODBUS TCP
X20PS9400Power Supply
X20DI937212x Digital Inputs
X20DO66396 Relays, 240 VAC
X20AI46224x Analog Inputs, 4-20MA or 0-10V
X20AP3131 

AC Meter, 480 VAC, 50/60 Hz, 5A sec. current


Single modules

VendorDeviceCommentConnects viaPower
AdvantechADAM-6251-AE16 Digital Inputs Ethernet ModuleEthernetDC 24V
AdvantechADAM-6217-AE8 Analogue Inputs Ethernet ModuleEthernetDC 24V
AdvantechADAM-6250-AE7 Digital Inputs, 8 Outputs, Ethernet ModuleEthernetDC 24V

Advantech has many more modules with different configurations of inputs and outputs. All of them should be compatible. For more information go here

Modular Modbus TCP

VendorDeviceCommentConnects viaPower
AdvantechADAM-5000/TCP-AE  8-slot Distributed DA&C System Based on EthernetEthernetDC 24V
AdvantechADAM-5051-AE 16-channel Digital Input Module with RoHSEthernetDC 24V
AdvantechADAM-5017P-AE8 Analogue Inputs Ethernet ModuleEthernetDC 24V
AdvantechADAM-5050-A2E 16-Ch Universal DI/O ModuleEthernetDC 24V

Power Sensors

AC Sensors

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput Parameters
ElkorWattsOn-1100-MSCT2-600AAC Power MeterRS485 MODBUSDC 24V50
  • Voltage (A, B, C, Avg, AB, AC, BC, Avg)
  • Current (A, B, C, Avg)
  • Active Power (A, B, C, Total) - Bi-directional
  • Apparent Power (A, B, C, Total)
  • Reactive Power (A, B, C, Total) - Bi-directional
  • Power Factor (A, B, C, System) - Bi-directional
  • Frequency
  • Import/Export Energy (A, B, C, Total)
  • Inductive/Capacitive Energy(A, B, C, Total)
  • Apparent Energy (A, B, C, Total)
  • Total Demand Power (W)
ElkorMSCT2Current transducer for WattsOn, one per phase needed To WattsOn (analog)
1Current
Elkori-Snail-SCurrent Switched Sensor, monitoring on/off state of a deviceDigital Input
1Go/No-Go Signal
Elkori-Snail-VCAC current sensorAnalog Input
1Voltage (DC, analog)

DC Sensors

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput ParametersComments
CE-TransducersAD11B-34GS4-1.0/0-250A*0-65VDC mulit parameter monitoring (U,I,P,KWh)RS485 MODBUSDC 24V1Voltage
CE-TransducersCE-AU11-34MS3-0.2/0-65V1-element DC Voltage MeterRS485 MODBUSDC 24V1Voltage


Battery Sensors

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput Parameters
HuasuH3G-TA12V-ABattery Monitoring System: 12V monitoringRS485 MODBUSDC 12V1Voltage and temperature
HuasuCTB-485-ABattery Monitoring System: UART to RS485RS485 MODBUSDC 12V1
HuasuTC-500-ABattery Monitoring System: Current ModuleRS485 MODBUSDC 12V
Current and temperature
HuasuCS-A0Battery Monitoring System: Current TransducerRS485 MODBUSDC 12V

Other Sensors

Enviromental

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput Parameters

Comet

T3411Temperature/Humidity SensorRS485 MODBUSDC 24V2 (RS485 Value)
  • Relative Humidity
  • Temperature
Ifm Electronic GmbHAZM170 ,Security Lock compactRelay output24V AC/DCnonenone

Ifm Electronic GmbH

JN2200Inclination sensor4-20 mA InputDC 24V1
  • Inclination in degrees
Ifm Electronic GmbHVTV122Vibration monitoring4-20 mA InputDC 24V1
  • Vibration in mm/s
Ifm Electronic GmbHIFS289  inductive sensorDry contactDC 24V1
  • open/close
Ifm Electronic GmbHDI6001Compact speed monitor M18 (number of revolutions)4-20 mA InputDC 24V1
  • Rotation yes/no
Ifm Electronic GmbHTA2105Temperature sensors4-20 mA InputDC 24V1
  • Temperature
Ifm Electronic GmbHO5D150distance measurement sensors4-20 mA InputDC 24V1
  • Distance in cm, m
Ifm Electronic GmbHKQ5100Capacitive sensorsDry contactDC 24V1
  • open/close

Fuel

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput Parameters
AST SensorsAST 4510 - Pressure SensorFuel level SensorAnalog Input DC 24V1
  • Voltage or Current

(indicate Pressure)

HolykwellHPT604Fuel level SensorModbus RTUDC 24V1 or 2
  • Pressure
  • Temperature (optional)

Access Control

VendorDeviceCommentConnects viaPowerNumber of Output ParametersOutput Parameters
HIDGlobalProxpro 5355Keypad HIDGlobal Proxpro 5355Wiegand DC 10-28.5V

InfranetWTSC-485WTSC-485 Wiegand to RS-485 Converter (for Keypad)RS485 MODBUSDC 24V

SimonsVossElectronic PadlockWireless Electronic PadlockWireless


SimonsVossKeypadWireless KeypadWireless


SimonsVossGateway NodeGateway to connect via wireless to the padlock and keypadEthernetDC 24V


Providers