You can reconfigure the network settings like default gateway and ip address of an B&R X20 Coppler directly via telnet.

Configuring an IP address

The required function code is fc6 followed by the address position and new value, for example: fc6 0x1005 123 sets the 123 in 192.168.123.77

 

sebastiankoch@~$telnet 192.168.97.77
Trying 192.168.97.77...
Connected to 192.168.97.77.
Escape character is '^]'.
Telnet Monitor (Press Ctrl-C or type 'quit' to quit) :
 
unknown command !
help
fcX YYYY ZZZZ    ... X = function code, Y = address, Z = data
flash store      ... store config to flash (same as fc6 0x1140 0xc1)
flash erase      ... restore default config (same as fc6 0x1142 0xc1
modules          ... get number of IO modules (same as fc3 0x1100)
restart          ... restart with flash parameters (same as fc6 0x1143 0xc0)
quit/end/exit    ... quit telnet session
---- end of help ----
fc6 0x1003 192
value:   192 (0x00C0)
fc6 0x1004 168
value:   168 (0x00A8)
fc6 0x1005 0
value:     0 (0x0000)
fc6 0x1006 77
value:    77 (0x004D)
flash store
value:   193 (0x00C1)
restart
Closing Connection !

 

Configuring a Subnet Netmask

Subnet configuration is similar to the setting of the ip address, use function code fc6 for each portion of the subnet mask, see below.

 

sebastiankoch@~$telnet 192.168.97.77
Trying 192.168.97.77...
Connected to 192.168.97.77.
Escape character is '^]'.
Telnet Monitor (Press Ctrl-C or type 'quit' to quit) :
 
fc6 0x1007 255
value:   255 (0x00FF)
fc6 0x1008 255
value:   255 (0x00FF)
fc6 0x1009 255
value:   255 (0x00FF)
fc6 0x100A 0
value:     0 (0x0000)
fc6 0x100A 192
value:   192 (0x00C0)
flash store
value:   193 (0x00C1)
restart
Closing Connection !

 

Configuring a Default Gateway

 

sebastiankoch@~$telnet 192.168.97.77
Trying 192.168.97.77...
Connected to 192.168.97.77.
Escape character is '^]'.
Telnet Monitor (Press Ctrl-C or type 'quit' to quit) :
 
fc6 0x100B 10
value:    10 (0x000A)
fc6 0x100C 59
value:    59 (0x003B)
fc6 0x100D 14
value:    14 (0x000E)
fc6 0x100E 65
value:    65 (0x0041)
flash store
value:   193 (0x00C1)
restart
Closing Connection !

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.