Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem

Walk through the suggested solution here if you face any of these problems.

  1. Your newly installed and configured Site Controller is not shown in Social Sensor Cloud → My Organization → Locations
  2. Your Site Controller shows OFFLINE for the cloud_connected sensor
  3. You see errors in log/cloudConnector.log file.

 

No route to host
2016-02-22 13:11:57,365:2839:[cloudConnector.py:971]:DEBUG:Trying to connect to 192.168.0.53:1883
2016-02-22 13:12:00,358:2839:[cloudConnector.py:986]:ERROR:Exception while trying to connect to 192.168.0.53:1883:
Traceback (most recent call last):
  File "/opt/azeti/SiteController/src/cloudConnector.py", line 973, in connect_to_broker
    mqttc.connect(host, port, 60)
  File "build/bdist.linux-armv7l/egg/paho/mqtt/client.py", line 612, in connect
    return self.reconnect()
  File "build/bdist.linux-armv7l/egg/paho/mqtt/client.py", line 734, in reconnect
    sock = socket.create_connection((self._host, self._port), source_address=(self._bind_address, 0))
  File "/usr/lib/python2.7/socket.py", line 571, in create_connection
    raise err
error: [Errno 113] No route to host

or

Connection refused
2016-02-22 13:25:15,236:3541:[cloudConnector.py:571]:WARNING:Could not publish to ExternalCloudBroker (azetibroker02.azeti.net)!
...
2016-02-22 13:24:41,982:3541:[cloudConnector.py:380]:DEBUG:ExternalCloudBroker: on_connect - rc: Connection Refused: not authorised. [5] flags: {'session present': 0}
2016-02-22 13:24:41,983:3541:[cloudConnector.py:414]:DEBUG:ExternalCloudBroker: Disconnected - rc: Connection Refused: not authorised.
2016-02-22 13:24:41,983:3541:[cloudConnector.py:425]:DEBUG:ExternalCloudBroker: is already marked as disconnected

Solution

  • Make sure SIteController runs, check by running SiteController/run_SiteController.py status on your device.
  • Error message on_connect - rc: Connection Refused: not authorised. implies incorrect MQTT credentials. Verify the configured user and pass in config/SiteController.cfg
  • Error message error: [Errno 111] Connection refused implies that Site Controller can't establish an outgoing MQTT TCP connection. Check your firewall settings and test for a successful outgoing connection with telnet (see below).
  • Error message no route to host implies that the broker host cannot be reached, either because the host is offline or you have no network connection to the host. Test if you can reach the MQTT broker as configured in config/SiteController.cfg,
telnet> open azetibroker02.azeti.net 1883
Trying 54.93.215.194...
Connected to azetibroker02.azeti.net.
Escape character is '^]'.

 

  • No labels