Settings
The following describes the settings for Configuration > Network > SNMP Configuration in detail.
| Setting | Description |
|---|---|
| Trap Agent Port | TCP Port to listen for traps |
| Trap Agent Debug Level | Level of debug detail starting from nothing (OFF) up to heavy debug (TRACE) . The log can be found in Administration Web Interface > Logs > SNMP Processor |
| Trap OID Output Format | Format of the corresponding trap OID, can be fully numeric up to symbolic. The Trap Filters are fully dependent on this setting, e.g. if you configured trap filters to match on numeric OIDs, you must set numeric OIDs as format here too. Otherwise the trap filters won't apply anymore. |
| Number of trap history entries | Number of last traps that should be saved in the trap history database, see Administration Web Interface > Trap > Filters |
| Trap community authorization string | Community string for authentication of incoming SNMP traps |
| Agent community string | Community for SNMP Agent (SNMP GET) |
| Agent sysName Value | System name, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysName.0 |
| Agent syslocation Value | System location, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysLocation.0 |
| Agent syscontact Value | System contact, OID: iso.org.dod.internet.mgmt.mib- 2.system.sysContact.0 |
On this page: