...
| Setting | Description | ||
|---|---|---|---|
Service avoid_wrapBug_confluence | Select the service from the selection box, for which notification escalation shall apply in the event of a fault.
| ||
| on single Host | Select a single host from the selection box to be checked by the dependent service. | ||
| or Hostgroup | Select a host group from the selection box to be checked by the dependent service. | ||
| First Notification | Define at what point the notification escalation shall be enabled. For example, If you enter "2" in the input box, the standard notification is sent once in the event of a fault. If the fault is not remedied so that the second notification is pending, the rule for notification escalation is enabled. The contact groups defined in the "Members" selection box of the "Contact groups" entry (see below) are notified. | ||
| Last Notification | Define at what point a further contact group (see below) shall be notified. Notification escalation for the specified contact group(s) is completed after the number of repetitions defined in this input box.
| ||
| Contactgroups | Specify the contact groups to be notified. By double-click in the "Nonmembers" selection box, add a contact group to the "Members" selection box or you can click on a contact group in the "Nonmembers" selection box then click the following button   . | ||
| Interval (minutes) | The repetition interval for notification escalation in minutes.
| ||
| Only escalate in timeperiod | Option to specify if notification escalation shall only apply for certain periods or always. | ||
| Only escalate when in state | The fault status for which notification escalation shall apply. For example, enable the "Down/critical" check box and disable all other check boxes to only enable notification escalation for critical fault status. |
...