...

The instructions are based on the example setup as described below.

SONARPLEX HA Master

This is the SONARPLEX HA master device which contains the productive host- and servicechecks.

...

SONARPLEX HA Slave

This is the SONARPLEX HA slave device which is completely empty and contains no productive information.

...

1. Configure the SONARPLEX HA master as the productive device. No further configuration is necessary.
2. Configure the SONARPLEX HA slave with just the host of the HA master. Add a servicecheck to that host with the template "check_azeti_ha".
3. Let the SONARPLEX HA slave run this servicecheck to start syncronisation.

Step-by-step guide

...

SONARPLEX HA Master

1. Insert excerpt
   _OpenAdminWeb _OpenAdminWeb nopanel true

    > Configuration > Network > Agent Configuration
2. Set Agent Password to "SamplePW" (without quotes)
3. Click Image Added to save the configuration.

SONARPLEX HA Slave

1. Insert excerpt
   _OpenAdminWeb _OpenAdminWeb nopanel true

    > Configuration > Setup > Hosts

2. Create new host with the IP of the SONARPLEX HA master, in this case 172.16.0.100.

3. Create new service with the plugin "check_azeti_ha" and add the just created host to the list of hosts to check.
4. Change the normal check interval to a value between 3-5 minutes to reduce gaps due to failover transitions.
5. Set Password (Optional) to the given SONARPLEX HA master Agent password "SamplePW" (without quotes).
6. Click Image Added to save the configuration.
7. Open the User Webinterface > Monitoring > Services
8. Wait for the just created check to report "OK" with a note on syncronized files.