NEXCOM NISE50 Installation Manual Contents
1. Introduction
1.1. Revision history
3. Platform Description
4. General Installation Overview
5. Installation USB preparation
6. Device Installation
6.1. Modem Installation
6.2. Software Installation
6.3. Software configuration
6.4. Default configurations Anchor
...
This
Table of Contents |
---|
Anchor | ||||
---|---|---|---|---|
|
This document will describe the general information about installation and configuration of the Nexcom NISE50 devices.
Anchor | ||||
---|---|---|---|---|
|
...
Version | Date | Author | Comments |
1.0 | 26/09/2017 | Jacobo Eraso | Initial version |
|
|
|
|
...
Anchor | ||||
---|---|---|---|---|
|
Powered by the latest generation of Intel® Atom™ processor E3826 (formerly codenamed "Bay Trail-I"), NISE 50 series positions at the intelligent IoT gateway for factory automation and for smart city applications. Up to 4G on-board DDR3L memory, the NISE 50 series support operating temperature from -5 up to 55 degree C with 24V DC input with +/-20% range. The NISE 50 series have strong connectivity - Ethernet-based LAN port and traditional RS485, mainly for Modbus TCP or Modbus RTU communication.
CPU | Onboard Intel® Atom™ processor E3826 dual core, 1.46GHz |
Main Memory | On-board 2GB DDR3L 1066/1333 RAM |
| - Un-buffered and non-ECC |
| - Max up to 4GB for option |
Display Option | 1 x HDMI display |
I/O Interface-Front | ATX power on/off switch1 x Storage/2 x GPO Programmable LED1 x SIM Card holder2 x Intel® I210AT GbE LAN ports; Support WoL, Teaming and PXE1 x HDMI Display Output4 x USB 2.0 (500mA per each)2 x Antenna Holes for optional Wi-Fi/3.5G antenna |
I/O Interface-Rear | 3 x DB9 for COM1 & COM2 & COM3 |
| - COM1: full RS232 signal |
| - COM2: RS232, only support Tx/Rx/GND |
| - COM3: RS422/485 auto flow control |
Storage Device | On-board 36GB EMMC / Optional mSATA module |
Expansion Slot | 3 x Mini-PCIe socket for optional Wi-Fi/3.5G modules |
| - Mini-PCIe: CN5; Size: Full; USB: V; PCIe:N/A; mSATA: Support; 3.5G/4G: Support |
| - Mini-PCIe: CN6; Size: Full; USB: V; PCIe:V; mSATA: N/A; 3.5G/4G: Support |
| - Mini-PCIe: CN7; Size: Half; USB: V; PCIe:V; mSATA: N/A; 3.5G/4G: N/A |
Power Requirements | Power input: 24V DC +/-20%1 x optional 24V, 60W power adapter |
Dimensions | 162mm(W) x 26mm(H) x 150mm(D) without wall-mount bracket |
Construction | Metal Chassis with fanless design |
Environment | Operating Temperature: |
| Ambient with air flow: -5°C to 55°C |
| (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)Storage Temperature: -20°C to 75°CRelative Humidity: 10% to 95% (non-Condensing)Shock Protection: |
| - mSATA / EMMC: 50G, half sine, 11ms, IEC60068-27Vibration protection w/mSATA or EMMC condition: |
| - Random: 2Grms @ 5~500 Hz, IEC60068-2-64 |
| - Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6 |
Certifications | CEFCC Class AUL/cUL |
Anchor | ||||
---|---|---|---|---|
|
...
- Insert the SIM card cover back to its original position.
Anchor | ||||
---|---|---|---|---|
|
...
sudo vi /opt/azeti/SiteController/config/SiteController.cfg
- In General, set the serial
[General]
# Allowed characters for the serial are upper and lower case ASCII [a-zA-Z],
# digits [0-9], dashes - and underlines _ only!
serial = Nexcom_Master
- Check in External configuration that the host, organizationShortName, user_id and password are correct.
- Save and exit (if using vi press :x)
...