Here is a list of recommended sensor to use with the Azeti solution. This list is only a recommendation, as any sensor that is compatible with the protocols supported (Modbus TCP, RTU, SNMP) can be used.
| Table of Contents |
|---|
Supported Protocols and Types
A wide variety of sensor and I/O protocols are supported and any standard device that complies with these standards is consider compatible. I/O Modules, such as the Advantech and B&R X20 extend the solution with hundreds of different input and output variations as these device translate from, e.g. 4-20mA or sink input into MODBUS TCP. See the vendor list and their catalogues for reference.
- MODBUS TCP
- MODBUS RTU/ASCII
- Digital Inputs
- Sink/source inputs (dry/wet contacts)
- Relay outputs
- Analogue Inputs
- 4-20 mA
- 0-5/10 Volt
- UDP Data
- TCP Sockets
Input/Output Modules
Modbus RTU
| Vendor | Device | Comment | Connects via | Power |
| Advantech | ADAM-4051-BE | 16 Digital Inputs | RS485 MODBUS | DC 24V |
| Advantech | ADAM-4117-AE | 8 Analogue Inputs | RS485 MODBUS | DC 24V |
| Advantech | ADAM-4150-AE | 7 Digital Inputs, 8 Outputs | RS485 MODBUS | DC 24V |
...
| Vendor | Device | Comment | Connects via | Power | Number of Output Parameters | Output Parameters |
| HIDGlobal | Proxpro 5355 | Keypad HIDGlobal Proxpro 5355 | Wiegand | DC 10-28.5V | ||
| Infranet | WTSC-485 | WTSC-485 Wiegand to RS-485 Converter (for Keypad) | RS485 MODBUS | DC 24V |
...