Page Comparison

...

<action action_id="fan_output" device_id="dev_X20BC0087">
    <commands>
      <command command_id="ON">write_single_coil(16,[1])</command>
        <command command_id="OFF">write_single_coil(16,[0])</command>
      </commands>
    </action>

Step-by-step guide

1. Log into the Dashboard. Go to Config/Provisioning → Sensor Templates → Site Templates and click on edit next to the location you wish to edit.
2. Activate the SuperUser Mode and expand the Actions row
   

...

1. Image Added
2. Now click the + next to Actions and click on the new create action.
   

...

1. Image Added
2. Firstly we need to add the device where the fan is connected to. This is the device_id. In our example it is connected to the X20BC0087 module.
3. Secondy we need to give the action an action_id. This is the unique name for the action. in our example it is called fan_output.
4. Lastly we need to define wich coil will be called with the command_id. In our example the coil 8 will be switched on (1) or off (0).
   

...

1. Image Added
2. You will need to use the "+ commands" function to add the specific rows.
3. Next switch back to normal user.

...