Page Comparison

...

Section

Column

width	70%

Attach the MG image restorer to your computer.
Delete the folder 'img' from the root folder of the MG image restorer, if present.
remove safely the MG image restorer from your computer.
Turn off the Machina Gate device (If ssh is possible: sudo shutdown -h now ), finally unplug the power supply.
Attach the MG image restorer to the Machina Gate device (NIFE103). If possible, use the left (black) USB socket.
Power on the Machina Gate.
Info
After these steps the Machina Gate is dumping its content to the MG image restorer. When it finished, the Machina Gate is powering off by itself.
Remove the MG image restorer from the Machina Gate.
The Machina Gate can be powered on now.

Column

Note
The MG image restorer should not be used to backup MG images as img file, as described in image backup. The reason is the 16GB size of the MG image restorer. It should be done with a 4 GB USB flash drive.

Warning
All data and all configurations, which are present at the Machina Gate before the restoration, get lost.

...

Turn off the Machina Gate device (NIFE103) (If ssh is possible: sudo shutdown -h now ), finally unplug the power supply.
Attach the MG image restorer to the Machina Gate device. If possible, use the left (black) USB socket.
Power on the Machina Gate.
Info
After these steps the Machina Gate is restoring itself from the MG image restorer. When it finished, the Machina Gate is powering off by itself
Power on the Machine Gate (plug in the power supply).

...

The Machina Gate is ready to rumble (ready to get configured).

Versions Compared