...

A SONARPLEX appliance can already be configured, for example via the administration web interface. You can read out this configuration in SONARMANAGER before adding further items to this configuration or changing it completely.

Reading out the configuration of a SONARPLEX appliance

...

To read out existing configuration of a SONARPLEX appliance, right-click on an appliance in the left section and select “Configuration Download” (see below).

...

An information text in the status line of SONARMANAGER indicates when the process is completed. 

Configuring SONARPLEX appliance

You can configure a SONARPLEX appliance with the following settings.

Creating and editing a time period

To create a new time period in SONARMANAGER, proceed as follows:

1. Double-click on Global Configuration > Timeperiods in the left section
2. Right-click to open the context menu and select “Add Timeperiod”. Then the “Timeperiod Configuration” screen opens (see below).
   
   You can find here more details about the parameters.
3. Click on “Save” to save the created time period configuration

...

1. Double-click on Global Configuration > Timeperiods in the left section
2. Right-click on the existing time period to open the context menu and select “Configuration”. Then the “Timeperiod Configuration” screen opens.
3. Enter your changes.
4. Click on “Save” to save the changes.

Creating and editing a contact

To create a new contact in SONARMANAGER, proceed as follows:

1. Double-click on Global Configuration > Contacts in the left section

2. Right-click to open the context menu and select “Add Contact”. Then the “Contact Configuration” screen opens (see below). 
   
   You can find here more details about the parameters.

3. Click on “Save” to save the created contact configuration

...

1. Double-click on Global Configuration > Contacts in the left section
2. Right-click on the existing contact to open the context menu and select “Configuration”. Then the “Contact Configuration” screen opens.
3. Enter your changes.
4. Click on “Save” to save the changes.

Creating and editing a contact group

To create a new contact group in SONARMANAGER, proceed as follows:

1. Double-click on Global Configuration > ContactGroups in the left section

2. Right-click to open the context menu and select “Add ContactGroup”. Then the “ContactGroup Configuration” screen opens (see below).
   
   You can find here more details about the parameters.

3. Click on “Save” to save the created contact group configuration.

...

1. Double-click on Global Configuration > ContactGroups in the left section
2. Right-click on the existing contact to open the context menu and select “Configuration”. Then the “ContactGroup Configuration” screen opens.
3. Enter your changes.
4. Click on “Save” to save the changes.

Creating and editing a host

To create a new host in SONARMANAGER, proceed as follows:

...

1. Double click on an appliance in the left section

2. Right-click on “Hosts” and select “Add Host”
   
   You can find here more details about the parameters. In “Use Template” you can choose a previously created host template. So the settings of the host template will be automatically assigned to the current host.

3. Click on “Add” to create the host.
4. Click on "Edit Details" to make further settings for the new host => The "Host configuration" screen opens (see below).
   
   The information contained in the screen above is explained here.

To edit existing host, proceed as follows:

1. Right-click on the existing host in the left section and select “Configuration” => the "Host configuration" screen opens.
2. Enter your changes.
3. Click on “Ok” to save the changes.

Creating and editing a host group

Group several hosts to form a host group to reduce administration work. To create a new host group in SONARMANAGER, proceed as follows:

1. Switch to the “Hostgroup View”. The default view of SONARMANAGER is the “Host View”
2. Click on an appliance in the left section and a list of host groups connected to this appliance, if existing, is displayed in the right section
3. Right-click in the right section and select “Add HostGroup” => The “HostGroup Configuration” screen opens (see below)
   
   You can find here more details about the parameters.
4. Click on “Save” to create a new host group.

...

1. Right-click on the existing host in the left section and select “Configuration” => the "HostGroup Configuration" screen opens.
2. Enter your changes.
3. Click on “Save” to save the changes.

Creating and editing a service

Services allow the monitoring of hosts. To create a new service, proceed as follows:

1. Right-click on a host in the left section and click on “Add Service” => The “service configuration” screen opens (see below).
   
   You can find here more details about the parameters.
2. Enter your settings and click on “Ok” to create a new service.

...

1. Double-click on the existing host in the left section.
2. Right-click on the existing service and select “Configuration” => the "service configuration" screen opens.
3. Enter your changes and click on “Ok” to save the changes.

Creating interdependencies of services

To create interdependencies between services, proceed as follows:

1. Switch to the “Dependencies” view.
2. Click on an appliance in the left section and a list of services dependencies, if existing, is displayed in the right section.
3. Right-click in the right section and select “Add Service Dependency” => The “Service Dependency” screen opens (see below).
   
   You can find here more details about the parameters.
4. Enter your settings and click on “OK” to create a new service dependency.

...

1. Click on an appliance in the left section. You should always be in the “Dependencies” view.
2. Right-click on the existing service dependency in the right section and select “Configuration” => the "Service Dependency" screen opens.
3. Enter your changes and click on “OK” to save the changes.

Creating notifications escalations

By creating escalation notifications you can select additional contacts that are notified in the escalation process. You can define escalation notifications both for a service and for a host.

...

To create notifications escalations, proceed as follows:

1. Switch to the “Escalations” view.
2. Click on an appliance in the left section and a list of escalations, if existing, is displayed in the right section.
3. Right-click in the right section and select “Add Escalation” => The “Escalation” screen opens (see below).
   
   You can find here more details about the parameters.
4. Enter your settings and click on “Ok” to create a new notification escalation.

...

1. Click on the existing escalation in the left section. You should always be in the “Escalations” view.
2. Right-click on the desired entry in the right section and select “Configuration” => the "Escalation" screen opens.
3. Enter your changes and click on “Ok” to save the changes.

Anchor
AutobackupSONARMANAGER AutobackupSONARMANAGER

Using the "AutoBackup" function

When the configuration of an SONARPLEX appliance is changed, to be able to restore the last functioning configuration in the event of a fault, first make a backup of the current settings of the SONARPLEX appliance. Use the "AutoBackup" function of SONARMANAGER or make a manual Backup in the administration web interface of the SONARPLEX appliance.

The backup is locally saved on that host. SONARMANAGER creates one subfolder for each SONARPLEX appliance in the SONARMANAGER directory. The names of the subfolders consist of the IP address of the corresponding SONARPLEX appliance.

...

Proceed as follows to enable the "AutoBackup" function:

...