Page Comparison

...

<device device_id="dev_X20BC0087">
  <modbus_device pdu_addressing="true">
    <modbus_tcp>
      <address>172.16.100.101</address>
      <port>502</port>
      <slave_address>1</slave_address>
    </modbus_tcp>
  </modbus_device>
    <sensor_gateways>
      .
      . 
      .  
    </sensor_gateways>
</device>

Step-by-step guide

1. Log into the Dashboard. Go to Config/Provisioning → Sensor Templates → Site Templates and click on edit next to the location you wish to edit.
2. Activate the SuperUser Mode and expand the Devices row.
3. Find the device.modbus_device.modbus_tcp.address.value.
   
4. Now click on the IP address and change it to the corresponding value the device is reachable under.
5. Switch back to normal user.
6. Deploy the Site Template to the according Location.

Related articles