How-To Set up SONARMANAGER so as to access with operator role

General setting, which should be used for all appliances, can be set on SONARMANAGER by proceeding as follows:

  1. Click on Setup > Settings => The "Settings screen opens with a view on Common Properties” (see picture belows)
  2. Fill the parameters values according to the explanations in the table below.

     ParameterDescription

     

     

     

     

     

     

     

    Common Properties

    Status File Download Interval in Minutes

    Defines at which interval (in minutes) a SONARPLEX appliance is updated automatically.

    Notice: The shorter the interval, the higher is the usage of the SONARPLEX appliance. We recommend not to set a value below the preset value of 5 minutes.
    Default Admin PasswordThe administrator password of the SONARPLEX appliance. With this password, SONARMANAGER logs into a SONARPLEX appliance. Otherwise the SONARPLEX appliance cannot be configured.
    Default Communication PortDefines the default port to access SONARPLEX appliance and azeti AGENT.
    Use Aliases in Status Tree 
    Preload Performance Charts 
    Split Problem Views 
    Use sounds for Problem NotificationIf enabled, an audio file is played in the event of a fault.
    Use Status Line for Problem NotificationIf enabled, an error message is displayed in the status line of SONARMANAGER in the event of a fault.
    Sound for Critical StatusChoose an audio file for the acoustic indication of the CRITICAL status.
    Sound for Warning StatusChoose an audio file for the acoustic indication of the WARNING status.
    Sound for Down StatusChoose an audio file for the acoustic indication, when a host is down.
    LanguageChoose the language of the SONARMANAGER application.
    Reopen SONARVIEW Windows 
    Check for SONARMANAGER UpdatesIf enabled, an automatic search for a program update for SONARMANAGER is performed at regular intervals. If there is a program update available, a corresponding information text indicates the possibility to install that program update.

     

     

    Mib Scanner

     

    Default SNMP VersionDefines the default SNMP protocol version to be used.
    Default Community String

    Enter the default SNMP community string.

    Example: public …
    Result Cache Time in Minutes

    Defines for how long the data of the last MIB scan are kept in the cache. If another MIB scan is performed within the time specified here, data from the cache are used. No further MIB scan is performed on the SONARPLEX appliance. That means no data are transferred.

    Default service TemplatesSelect the default service template.
  3. Then click on “Ok” to save changes.

 

The following macros are not currently supported in the footer:
  • style